New Year’s Day Fox Hunt, Windsor (CT) Vicinity, January 1, 2024

Paul Gibson, N1TUP, writes on the BEARS of Manchester and ctfoxhunter lists:

Greetings Foxhunters,

Keeping with tradition, I will be hosting a Foxhunt on New Years Day at 1pm.

This hunt will be conducted in the same manner that we have previously conducted live foxhunts. The hunters will assemble at the 91 Ayers Road in South Windsor, CT, home of the old Wapping Elementary School, be set up and ready to start by 1pm. The fox will take a roll call at 1pm on the BEARS repeater, 145.110 MHz, PL tone is 77.0 Hz. This hunt will be conducted using the repeater for all communication and information sharing. I encourage communication between participants and any base stations that can supply helpful information to the hunters. Once you have spotted the fox you should stop all transmissions. Pay attention, if someone says they are going to check an area and you never hear from them again, that might be a clue. Remember not to hunt the repeater output frequency as that will just lead you to the repeater. I will not be there. You will want to listen on the repeater input frequency, 144.510 MHz. That is the frequency the fox will be transmitting on.

The fox will be located within 20 air miles of the starting point and not within Hartford or Springfield. The fox will be on publicly accessible property that will not require anything other that a standard passenger car for access. The fox will host a “tailgate” party at the end of the hunt at the “den.”

If this is your first hunt, I would recommend riding along with someone who has done this before. Dress warmly as you will be outside at the end for the party, the rest of the time you will be in and out of the car taking bearings etc.

Experience has shown that hunters will start arriving in the den about 1 hour after the start. The event has a two hour time limit not including socializing in the den at the end.

Current information regarding this and other foxhunts in Connecticut are on groups.io. If you are not already a group member, you may want to consider signing up for the groups.io CTFOXHUNTER so that you do not miss any important foxhunt related news.

73,
Paul, N1TUP

Providence RA Adds Storage Space

Providence Radio Assoc logoKudos to members of the Providence Radio Association in Johnston, RI, Wrapping up 2023, the PRA completed a challenging project: providing additional long term storage at the W1OP clubhouse.

A foundation was carefully measured and constructed by volunteers. Then a multi-purpose container and was delivered to the site and installed on the foundation. 

Writes PRA President Dave “Tess” Tessitore, K1DT, “Thanks to all who worked on this project for several weeks, especially our House Chair [Bob Hart], KC1NAB!”

(via Facebook, photos by Gil Brown, N1BBM)

402885468_10220802655610870_7538848375523133178_n
404293099_10220802655130858_3420451644114890465_n
404349468_10220802657170909_6928092771116075568_n
405605369_10220802670011230_3445970720417783459_n
405622385_10220802678131433_5654565819370134861_n
405553928_10220802685691622_5897939058680889142_n
405562235_10220802684771599_4442604442857188394_n
404316284_10220802685251611_6452825631208903955_n
previous arrow
next arrow

TAPR To Hold Online “Mini-Digital Communications Conference,” December 9, 2023

TAPR logoFrom The ARRL Letter, November 22, 2023:

Tucson Amateur Packet Radio, Inc. (TAPR) will hold an online Mini-Digital Communications Conference on December 9, 2023, from 1700 to 2230 UTC (1200 to 1730 EST, 0900 to 1430 PST). Log in details for the conference will be available at https://tapr.org prior to December 9. TAPR is an international amateur radio organization that was founded in Tucson, Arizona, in 1981 by a group of amateurs interested in developing a terminal node controller (TNC) for amateur use. Presentations during the conference will include:

  • TAPR Software Defined Radio (SDR) Development Progress and Challenges by David Larsen, KVØS
  • Developments in KA9Q Radio by Phil Karn, KA9Q
  • An Open Source Wideband HF Receiver Design by David Witten, KDØEAG
  • An Inexpensive Global Positioning System Disciplined Oscillator (GPSDO) for HF Receivers by John Ackermann, N8UR
  • Current Open Source Digital Voice Techniques by Walter Holmes, K5WH
  • A Low Cost FreeDV-based ESP32 Radio Interface by Mooneer Salem, K6AQ
  • ESP32 Automatic Packet Reporting System (APRS) and Long Range (LoRa) Hardware by Jason Rausch, K4APR

CT ARES Training Class Offerings

ARES logoConnecticut DEC Douglas Sharafanowich, WA1SFH, writes on the ct-ares mailing list:

HAPPY Thanksgiving Day. As you relax today, here is serious question to ask yourself…

Are YOU ARES TRAINED and EQUIPPED?

GET ARES TRAINED (Registration info Below)

Overview
ARES has advanced into the 21st Century, and new skills and capabilities are required to meet the needs of the day.
As a result, ALL ARES members are now being requested to complete the national ARES Individual Operator Task Book: LEVEL 1 & LEVEL 2.
And, for those interested in Leadership positions, to complete LEVEL 3.

PRACTICAL Encouragement
In order to assist ARES members in meeting some of the KEY requirements and help be better prepared for a BLACK SKY event (i.e.; “The Next BIG ONE”), a series of FREE monthly Training Classes (on Saturdays) are being held in Region 2.

Training Classes being Offered (details below)
• Introduction to VHF Winlink (Part 1)……………. Dec. 2, 2023
• Introduction to VHF Winlink (Part 2)…………… Jan. 13, 2024
• Introduction to FEMA Message Forms…………. Feb. 3, 2024
• Introduction Net Control Station Operations…… March 2, 2024
• Introduction to HF Winlink……………………….. April 6, 2024

When: Saturday Mornings (8 am to 11.30 am)
Where: Various locations in Region 2

Training Classes (Details)
These classes include basic concepts, but more importantly also focus on helping you become functional in each area… IF YOU DO YOUR PART.

Introduction to VHF Winlink (Part 1)
Date: Dec. 2
Where: Guilford Fire Department
390 Church St., Guilford

In this Class you will learn about Winlink, How to Set-Up Winlink on your computer, and How to send messages via TELNET. You will also learn what you will need to bring with you to “PART 2” in order to send messages via RF using your VHF/UHF radio.

YOU BRING:
Your laptop/notebook computer (Windows preferred) with Winlink loaded onto it, a paper Notepad, pencils/pens

Introduction to VHF Winlink (Part 2)
Date: Jan. 13
Where: North Haven Fire Dept. Company #4
366 Washington Ave., North Haven

During this Class, you will connect your computer and radio to an antenna to send Packet Winlink messages over the air through a local WINLINK GATEWAY, and do Winlink P-2-P (Peer to Peer) messaging.

YOU BRING:
Your laptop/notebook computer, your VHF/UHF mobile radio (5-50 watts), 12v Power supply (Battery, or AC/DC with short ext. cord), connecting cables, Computer to Radio Interface: Terminal Node Controller (TNC), or a Sound Card Interface (SCI) with a TNC Emulator loaded on your computer, and a mag mounted VHF/UHF antenna with a metal pizza plate/baking plate, paper for notes, pencils/pens.

HINT #1
With Christmas rapidly approaching, best to tell Santa to bring you the gear you need for this class.

Introduction to FEMA Message Forms

Introduction to FEMA Forms
Date: Feb 3
Where: Quinnipiac Valley Health District
1151 Hartford Turnpike, North Haven

You need to know what Forms our “served agencies” are using, where to find them in Winlink and how to send them. During this class you will be introduced to the common forms that are in use, and send a few via TELNET.

YOU BRING:
Your laptop/notebook computer with Winlink loaded (and set-up), paper for notes, pencils/pens.

Introduction Net Control Station Operations
– Basic skills in running an efficient Net, plus tips for Staying Organized when the SHTF.
Date: March 2
Where: Quinnipiac Valley Health District
1151 Hartford Turnpike, North Haven

I have heard it said that in the USMC: ‘Every Marine a Rifleman’.
Similarly,

In ARES: Every ARES operator is a Net Control Station Operator

Imagine this:
One day, the situation will arise when you will be thrust into taking over a Communications Net as a Primary or Reliever Net Control Station operator.
– It will be at this exact moment that you will wish you had been at this class and taken advantage of periodically practicing the skills during CT ARES weekly Nets.
THIS IS IMPORTANT – Don’t miss it!

YOU BRING:
Your laptop/notebook Computer, a paper Notepad, pencils/pens

Introduction to HF Winlink
– You need to send Winlink messages, but no working VHF Winlink Gateway is nearby.
Date: April 6
Where: North Haven Fire Dept. Company #4
366 Washington Ave., North Haven

GOT General, Advanced, Extra license? Then, this class is for YOU!

In this class you will learn how to send HF Winlink messages successfully and practice sending a few over the air.

YOU BRING:
Your computer, connecting cables, a 100 watt HF radio, 12v Power Supply (Battery or AC/DC with ext. cord), a Sound Card Interface (SCI) if not built-in to the HF Radio, paper for Notes, pencils/pens.

HINT #2 (Repeat)
With Christmas rapidly approaching, best tell Santa bring you the gear you need for this class.

Bottom Line
If you are serious about getting the training you need to be effective in ARES, then you need to make the decision to do it.

And, TODAY is a GOOD DAY to JUST DO IT.

* SPACE IS LIMITED
* SEATS ARE LIMITED

* Reservations ARE Required
– If you just show up without a reservation, don’t expect that there will be space for you.

REGISTER for Classes HERE
Please register using the Google Sheets document (link below).
Enter your information and put a “1” in each class you will attend.
(The program automatically SAVES your input. So, just close the page to exit.)
I will confirm you Reservations with a reply email.
LINK

https://tinyurl.com/58rtzdct


73, Douglas Sharafanowich – WA1SFH
ARES District Emergency Coordinator (DEC)
Region 2 – Connecticut Section
email: wa1sfh “at” arrl “dit” net

Communications Assistance Request: Sutton (MA) Chain of Lights, December 2, 2023

Sutton Chain of LIghts trolley stopFrom wma.arrl.org:

President Valerie Moore, KC1COQ, of the Worcester EmComm Team writes:

Craig Shea from the Sutton Chain of Lights is again requesting assistance with communications to coordinate the trolleys for their annual event. We’re looking for about 10 amateur radio operators to ride the trolleys and help keep them on schedule moving people around between stops. [Full story]

WCAX: Made in Vermont: W1SFR

Screen image from W1SFR story on WCAXSteve Goldsmith, W1HS, writes on the Twin State RC and Connecticut Valley FM Association mailing lists:

Nice story about a local ham . . . and a great gift idea for the holidays . . . i.e., show it to your family and hope they get the hint and buy you one. -)
 

SUDBURY, Vt. (WCAX) – Steve Roberts spends a lot of time messing with metal, making Morse code keys.

“HAM radio is a very tight community really, and you have friends like all over the world, people you’ve never met,” said Roberts, whose call letters are W1SFR.

His side hustle is key for the community, and it’s not something you accidentally start doing. Roberts’ journey into dots and dashes began in Vietnam.

[Full story]

 

Meriden ARC/Wallingford ARG “Santa” QRV for North Pole Contacts, December 9, 2023

Meriden (CT) Amateur Radio Club writes on Facebook:

Come see Santa and talk to the North Pole with ham radio!

Santa will be onsite at the Yalesville Fire House at 143 Hope Hill Road between 10 AM-1 PM. Crafts and activities for the kids and a goodie bag and certificate from Santa (while supplies last).

Please bring a nonperishable food donation for Masters Manna.

Meriden Santa announcement